+7 381 249-00-02Please email usRequest a quote
  1. Home
  2. Articles and guides
  3. EPIRB for a particular vessel: data, markings and documents
Practical technical guide // RS and RKO rules

EPIRB for a particular vessel: data, markings and documents

When replacing an emergency position-indicating radio beacon, agreeing on the model name and container is not enough. Before delivery, the particular unit must be linked to the correct vessel by checking its identifiers, prepared data and documents. NSR NEB-2000 is a marine Cospas-Sarsat EPIRB with AIS and built-in GNSS. For procurement, establish in advance which information to provide and what must accompany the equipment.

Request a quote

Conceptual emergency position-indicating radio beacon beside a closed document folder on an orderly shipboard desk.
Editorial illustration of checking a unit against its documents. It does not show actual codes, markings, condition or readiness of a particular NEB-2000.

Scope of the requirements

This example concerns a vessel of RKO class being fitted with an EPIRB under the applicable shipboard documents. It uses Part VII, Radio Equipment, of the Rules for the Classification and Construction of Ships, as amended by Order No. 29-p dated 31.03.2026. Under clause 1.1.2, new products, vessels under design or construction, and equipment in service must be distinguished: unless otherwise specified, the latter remain subject to the requirements under which they were built or manufactured. Additional Administration instructions are considered under clause 1.1.5.

The marking clauses do not prescribe one mandatory coding protocol for every beacon. The version, message standard, flag and vessel documents establish the starting conditions. Applicability of this example to a vessel under another classification system must be determined separately.

Distinguish vessel information from equipment information

Clause 4.9.4 lists the vessel call sign, EPIRB serial number, MMSI where applicable, hexadecimal identifier and battery expiry date. These are separate fields, each of which must be checked against the relevant documents. The equipment serial number, vessel MMSI and hexadecimal identifier must not be treated as one interchangeable code.

Prepare a separate schedule for each beacon. For a batch intended for several vessels, use a separate entry showing the model and serial number, vessel name, call sign, applicable MMSI and documented identifier. For a replacement, specify which details relate to the removed unit and which to the new one. An old number must not accidentally be carried over into the documents for the new supply.

Information groupWhat to provide or confirm
VesselName, flag, class, call sign and the vessel's MMSI
Individual EPIRBModel, serial number, version and manufacturer
Prepared dataApplicable protocol and confirmed identification details
Condition and datesBattery markings, scheduled maintenance and test documents
RegistryConfirmation relating to this EPIRB and its current details

What to check on the markings

Clause 2.6.8.6 specifies a broader list of external markings: manufacturer, type or name, serial number, year of manufacture, power-supply information, brief instructions in Russian and English, power-source shelf life, Cospas-Sarsat identifier, magnetic-compass safe distance and next shore-based maintenance date. When ordering, request legible information for the particular unit rather than a catalogue photograph of the model.

Check that the identifiers on the unit, in the preparation documents and in the delivery package agree. If a date or code is illegible in a general photograph, it remains an open point to resolve. Dates and remaining service life cannot be inferred solely from a promotional description of the product family. Do not cover or replace identification details yourself based on an assumption about the correct number.

Coding and registration are parts of preparation

Clause 2.6.8.17 describes inclusion of the identification code in 406 MHz messages and distinguishes the options for C/S T.001 and C/S T.018. The responsible contractor must confirm the selected option and the data actually prepared using the documentation for this EPIRB. This guide does not specify how to reprogram a beacon, change its country code or bypass service restrictions.

Under clause 2.6.8.26, an EPIRB in use aboard a vessel must be registered in the Cospas-Sarsat 406 MHz beacon registration database. The work scope includes checking the confirmation relating to the unit and its current details. Sending an enquiry to a seller does not mean registration has already been completed. The steps are established for the actual flag and applicable procedure; this article promises neither registration services nor filing documents on the owner's behalf.

What is documented for the NEB-2000

The NSR V16 brochure describes a marine AIS EPIRB, built-in GNSS, satellite transmission, a homing signal and an AIS transmitter. These functions serve its emergency purpose. They do not turn the NEB-2000 into an ordinary AIS unit for continuously exchanging vessel movement information.

The manufacturer lists the beacon, container with HRU and accessories. The quotation must identify the contents of the particular package, its markings and the condition of its components. Data preparation, document checks and necessary work are agreed as a defined scope. Manufacturer documents do not automatically establish approval of every individual unit for every vessel.

Acceptance must link the unit to its paperwork

Clause 2.6.8.13 provides for EPIRB checks and a document confirming operability under the procedure established by the authorized Russian authority. At handover, check the model, serial number, identification details, markings, dates and agreed documents. Test methods must come from the applicable procedure and manual; this article does not propose activating a distress transmission to demonstrate an identifier.

For a quotation for the NEB-2000 send the vessel documents, state whether the task is an initial installation or replacement, and provide details of the existing beacon and required work. Add the quantity and delivery city. We confirm the version, documents, preparation, actual contents, condition, availability, price and lead time in writing. Physical location and float-free release are covered in a separate article in the series and remain distinct considerations.

Sources: RKO: amendment to Part VII under Order No. 29-p, 1.1.2, 1.1.5, 2.6.8.6, 2.6.8.13, 2.6.8.17, 2.6.8.26, 4.9.4; NSR NEB-2000, brochure V16.

More in this series

Request a quote