+7 381 249-00-02Please email usRequest a quote
  1. Home
  2. Articles and guides
  3. AIS class in the enquiry: start with the vessel's requirement
Practical technical guide // RS and RKO rules

AIS class in the enquiry: start with the vessel's requirement

The same word 'AIS' in two quotations does not mean the same equipment. One project may require Class A, while another confirmed task may permit consideration of Class B. SpectraTech's own catalogue includes NSR NSI-1000 Class A and NSR NAB-1000 Class B. Comparing their prices and package contents is useful after the required equipment class has been defined in the enquiry.

Request a quote

Two schematic shipborne equipment options and closed technical folders on a bridge workstation.
Schematic illustration of equipment selection against a brief. Unit appearance does not establish AIS class or confirm NSI-1000 or NAB-1000 approval.

Where the cited RS table applies

The example is based on Part V, Navigation Equipment, of the RS Rules for the Equipment of Sea-Going Ships, edition 01.01.2026. Under 1.1.1, its requirements concern self-propelled ships not engaged on international voyages and equipment intended for them. Under 1.1.3, additional flag State maritime-administration instructions take precedence in case of a discrepancy. This table cannot be applied to every vessel without checking its scope.

Clause 2.1.1 links the navigation-equipment complement to the vessel's purpose and gross tonnage. Row 14 of the table explicitly names Class A AIS equipment. For ships of 500 and above, the relevant columns specify one such installation. In smaller categories, the row carries footnote 4: required for passenger ships. Consequently, 'small vessel' or 'not an international voyage' is not by itself a sufficient reason to select Class B.

Reading a replacement brief

Consider an enquiry from an operating ship: 'We need a new AIS with a display.' Before choosing a model, clarify the vessel's purpose, gross tonnage, flag, applicable edition and design requirements. If the installed equipment is already identified as Class A, that is useful background, but the vessel's documents must still determine the new installation's role.

Specify the class as a separate line in the technical brief. An external display, power, included antennas or ability to show targets does not change that class. Adding an apparently suitable MKD to a Class B radio unit cannot produce the required Class A AIS.

Question before costingRequired background information
Which vessel is being equipped?Purpose, gross tonnage, flag and voyage pattern
Which requirement applies?Rules, edition, Administration requirements and design
Which class is required?An explicit A or B, rather than 'any AIS'
What is being replaced?Existing installation model and items to retain
What must the supply cover?Radio unit, display, antennas, cables, documents and work

Two models with distinct confirmed roles

The manufacturer identifies NSI-1000 as AIS Class A. Where a Class A requirement has been established, prepare the quotation around the appropriate configuration of this model and its documents. Separate guides in this series address placement, alarms, data sources and the pilot connection; selecting the correct class does not remove those parts of the equipment brief.

NAB-1000 is explicitly described in the NSR rev15.1 brochure as AIS Class B using CSTDMA, intended for non-SOLAS vessels. It is a genuine marine model of its class. However, that manufacturer description does not authorize its substitution for Class A required by the applicable RS Rules. If a customer is considering Class B for a separate permissible task, establish applicability and the required document package before ordering, rather than inferring them from a lower price or a generic equipment name.

For NAB-1000, the manufacturer distinguishes the radio unit from display options: MKD and a chartplotter are listed as options. SpectraTech's own product page describes a particular package that must be confirmed in the quotation. The buyer should be able to see which display is actually included, which antennas and accessories are supplied and which items are retained from the previous installation.

Type approval and the specification serve different purposes

Under 2.1.2, navigation equipment installed in accordance with the table must meet the stated normative documents and be of a Register-approved type. A catalogue model name, manufacturer brochure or foreign approval does not replace checking the required valid document for the particular configuration.

Clause 2.1.3 permits replacement with other new, newly developed or modernized equipment where its purpose is equivalent, its characteristics meet or exceed the requirements and it is approved by the Register. This is not a rule that 'more functions make any replacement acceptable'. Equivalence is not established by comparing two advertising pages.

Record class, configuration, documents and hardware inventory separately in the specification. Confirm compatibility of retained antennas or external displays using their model designations and documentation. If an interface or connection scheme changes, include the associated work in the quotation in advance.

What should be clear at equipment handover?

The owner receives a defined installation: the selected class, specific units, data sources, agreed connections and documents. The verification programme must follow the design and manuals, including the required data exchange and presentation. Similar images on the screens of two different systems do not demonstrate their regulatory interchangeability.

For a quotation for NSI-1000 or a separately considered NAB-1000 attach the original class requirement, vessel particulars, model of the AIS being removed and inventory of retained parts. State the scope of work, quantity and delivery city. We confirm the current configuration, condition, availability, full package, applicable documents, cost and delivery schedule in writing. Quotations can then be compared against one agreed task, rather than the generic word 'transponder'.

Sources: RS, Rules for the Equipment of Sea-Going Ships, Part V, edition 01.01.2026, 1.1.1, 1.1.3, 2.1.1 and table row 14/footnote 4, 2.1.2–2.1.3; NSR NSI-1000 AIS Class A; NSR NAB-1000, rev15.1 brochure.

More in this series

Request a quote