+7 381 249-00-02Please email usRequest a quote
  1. Home
  2. Articles and guides
  3. Speed log for a project: speed through the water or over the ground
Practical technical guide // RS and RKO rules

Speed log for a project: speed through the water or over the ground

An enquiry to replace a speed log must specify the reference for speed and distance. A vessel may need both speed and distance through water and speed and distance over ground. NSR NGC-3000 has a defined marine role. The manufacturer describes it as a satellite speed log, transmitting heading device and GNSS instrument. Assign these functions in the design before buying.

Request a quote

Illustrative vessel in a river mouth beside a fixed breakwater, with bands of colour representing water movement.
Conceptual illustration of a vessel moving through water past fixed shore references. It does not show measured speeds or NGC-3000 performance.

Which vessels the RS requirements cover

This review covers Part V, Navigational Equipment, of the RS Rules for the Equipment of Sea-Going Ships, version of 1 January 2026. Paragraph 1.1.1 applies to self-propelled vessels not engaged in international voyages and the navigation equipment intended for them. Under paragraph 1.1.3, follow additional flag Administration instructions where they differ. Determine applicability separately for other vessels or classification regimes.

Equipment depends on vessel use and gross tonnage under paragraph 2.1.1 and its table. Provide actual vessel data, intended navigation functions and applicable documents. A catalogue listing alone does not determine mandatory equipment.

The two speeds answer different questions

Speed through water describes motion relative to the surrounding water. Speed over ground describes motion relative to the Earth’s surface. A current can make the values differ even when equipment works properly. Displaying both values in knots does not make them interchangeable.

SOG is speed over ground. COG is the direction of that movement, while heading is the direction in which the bow points. Specify course and heading separately. For every displayed value, identify its meaning, source and receiving equipment.

Note 1 to Table 2.1.1 requires a speed log measuring speed through water on vessels fitted with radar providing electronic plotting, automatic tracking or automatic radar plotting aids, and/or a track control system. Identify the actual radar and control system functions before selecting a replacement. A SOG source alone does not establish compliance with that requirement.

When independent measuring devices are needed

Paragraph 2.1.7 covers ships of 50,000 gross tonnage and above, and other ships that require both an absolute log measuring speed and distance over ground and a log measuring speed and distance through water. It calls for two independent devices in those cases.

Two displays connected to one sensor do not establish independence. Multiple outputs from one instrument do not create two devices. Identify each measurement source before drawing the displays and data receivers.

RequirementWhat to state in the specification
Speed and distance through waterRequired measurement function and a separate suitable source
Speed and distance over groundPurpose of the absolute measurement and its receivers
Vessel headingBow direction required in addition to COG
Both log types under paragraph 2.1.7Two independent devices, each with a defined function

Where the NGC-3000 fits

The NSR rev15.4 brochure calls the model a Satellite Speed Log & THD/GNSS and lists SOG, COG, position, heading, and longitudinal and transverse speeds. This supports considering NGC-3000 for its satellite functions and intended over-ground data. The word “log” or a message name does not establish measurement through water.

The manufacturer lists separate processor, display and antenna units. Identify retained parts and the selected version for a replacement. The quotation should specify units, interconnection accessories, external lines and work. Select equipment that actually measures through water where required. Relabelling a satellite instrument display does not provide that measurement.

The brochure describes family capabilities. For mandatory equipment, paragraph 2.1.2 calls for a Register-approved type that meets applicable normative documents. Manufacturer documents and an approval cited from another authority do not establish RS approval of a particular version. Request the applicable current documents and their scope.

What to check before agreeing on the price

Provide the installed log designation and measurement principle, radar and control system models, existing diagrams and project requirements. Identify which receivers need speed through water, SOG and heading. This establishes the hardware scope before selecting displays and cables.

The acceptance programme should confirm the agreed values at the intended receivers and show their statuses clearly. The aim is not to force through-water and over-ground speeds to match. Set scope and criteria from the project, applicable documents and instrument manuals. This review does not provide a sensor calibration procedure.

For an NGC-3000 enquiry, add gross tonnage, vessel use, flag and operating area, required function, retained system and quantity. Give the city and required date for delivery within Russia or to Kazakhstan. Confirm version, documents, condition, contents, stock and cost in the quotation. This defines the measurement need and any separate source required.

Sources: RS, Rules for the Equipment of Sea-Going Ships, Part V, edition 01.01.2026, paragraphs 1.1.1, 1.1.3, 2.1.1 with Note 1, 2.1.2 and 2.1.7; NSR NGC-3000, rev15.4 brochure.

More in this series

Request a quote