Catalogue › Interference-resistant GNSS antennas › Gamma-100 equipment replacement: check the exact SKU
Gamma-100 equipment replacement: check the exact SKU

A practical look at the NavCom Gamma-100 interference-resistant GNSS antenna and its integration requirements.
The application
A service enquiry should distinguish the new product from older equipment with a similar name. The interference-resistant Gamma-100 GNSS antenna has SKU 21381. A shared Gamma name does not establish interchangeability, pin assignments or the package needed to replace an old receiver or antenna.
Agree these details before ordering
List the retained devices, existing connections and observed fault. The new antenna is specified for 24 V, up to 8 W and four elements. Resolve integration from technical information; the stated maximum of three interference sources is not a substitute for interface compatibility.
Reading the specifications
The model specifies 4 antenna elements, up to 3 simultaneous interference sources and 24 V power. Read resistance ratings together with the stated source count and agreed application conditions. These figures do not define antenna gain or a guaranteed operating radius.
Package and installation
The stated package comprises the antenna, a stabilized supply, a 10 m antenna cable, a 10 m power/data cable, mounting hardware and documentation. Series dimensions are 280 × 210 × 81 mm maximum. Agree mounting details, mating connectors and the data format for the actual equipment.
Model specifications at a glance
- Antenna elements
- 4
- Simultaneously suppressed interference sources
- 3 maximum
- Interference resistance
- 110 dB with 1 interference source; 95 dB with 3 interference sources
- Supply voltage
- 24 V
- Power consumption
- 8 W maximum
- Operating temperature
- −40…+85 °C
- Storage temperature
- −55…+85 °C
- Mass
- 2.0 kg maximum
Questions and answers
Does this equipment suppress UAVs?
No. This description concerns the GNSS receiving path. UAV detection or suppression is not stated.
Does an RS-232 or RS-422 interface establish compatibility?
No. Agree the protocol, line parameters and interfacing equipment. The source does not provide a full list of compatible instruments.