Different manufacturer manuals for the Vertex Standard VX-1700 use the same MAIN Unit heading but list different assembly numbers. To order an expensive board, identify the radio variant and the applicable manual revision. Asking only for a VX-1700 main board leaves too much unspecified.
Request a quotation for a Vertex Standard VX-1700 or an internal assembly

MAIN CB2421001 / FR010270E and CS1853702
The service manual EC051H90A, EXP Version, 2005, on page 53, lists CB2421001 as PCB with Components and FR010270E as Printed Circuit Board. The populated assembly and bare PCB are separate parts-list entries.
In the later EC051H95M, USA Version, 2015, on page 59, the MAIN entry for PCB with Components lists CS1853702. These manuals cover different revisions and regional variants. The part numbers identify the difference and do not establish interchangeability.
Provide the readable markings on the installed assembly and the full radio designation. If a supplier offers a different number, ask for separate documentation confirming compatibility with your unit. A similar board number from another manual should not silently replace the required part on the invoice.
PA-2 and PA-4: the mounting also matters
In EC051H95M, the PA-2 section applies to Lot 1–108, and PA-4 applies to Lot 109 onward. Page 97 lists the PA-4 assembly CS2213101. In this list, Lot identifies a production batch and does not specify the number of boards supplied.
Page 3 of the same manual notes that the PA-4 and PA-2 mount differently. Converting from PA-2 to PA-4 requires replacing the chassis and antenna connector along with the amplifier assembly. Evaluate a board-only offer separately from a complete kit for the conversion. Have a service technician confirm the scope and suitability of the work for the specific unit.
Other assemblies in the 2015 USA edition
- CB2833001 · PANEL UNIT
- Panel assembly designation in the manufacturer’s assembly drawing on page 3 of EC051H95M. List the retained and required front-panel parts separately in the order.
- CB3183001 · GPS INTERFACE UNIT
- Interface assembly designation in the same drawing. Agree separately on the required internal assembly, external receiver, and connecting circuits.
These designations come from the cited manual. A photo of the outside of a stocked unit does not establish its variant. If replacing only one assembly, specify which other parts will remain in the radio.
Complete radio stock and separate board quotations
VX-1700 product listing on SpectraTech shows the radio in stock. That does not establish separate stock of the MAIN, amplifier, panel, or interface assemblies. Confirm availability, variant, condition, documentation, and price of the board as a separate line item.
Include the model, serial number, regional variant, markings and lot of the required assembly, quantity, and delivery city. Attach a service assessment if repair is needed. For each option, agree on what the price covers: the assembly, related parts, work, and verification.
If you are buying a complete radio for an existing operating station, consult the VX-1700 operating station equipment guide. For internal electronics, the main attachment is the exact list of repair assemblies.
Product page and manufacturer documents
- Vertex Standard: Service Manual EC051H90A, EXP Version, 2005, page 53, archived manufacturer manual
- Vertex Standard LMR: Service Manual EC051H95M, USA Version, 2015, pages 3, 59, and 97, archived manufacturer manual
Request a quotation for a Vertex Standard VX-1700 or an internal assembly