+7 381 249-00-02Please email usRequest a quote
  1. Home
  2. Articles and guides
  3. Unicont CH-105: display board, main board, and ribbon cables
Technical guide // 4 min reading

Unicont CH-105: display board, main board, and ribbon cables

For a Unicont CH-105 / AZU-105 repair, specify the part required: display board, control assembly, main board, or ribbon cable. An enquiry for a “charger panel” can refer to several different parts. This guide covers internal assemblies. Selection of a complete unit for a shore station is covered in a separate article.

Request a quotation for a Unicont CH-105 / AZU-105 or an internal assembly

Unicont CH-105 charger from the SpectraTech catalog. The photo of the housing does not show markings on internal boards or establish that they are available separately.
Unicont CH-105 charger from the SpectraTech catalog. The photo of the housing does not show markings on internal boards or establish that they are available separately.

Assemblies named by the manufacturer

In operating manual TsIUL.436537.305, version 3.0, reissued in 2024, NPK Morsvyazavtomatika LLC names the display board, keypad board, and main board. Table 13 lists the interconnecting ribbon cable as one possible cause of LCD or key failure.

These terms identify parts of the equipment but are not ordering numbers. Confirm the actual layout, markings, and revision of the particular CH-105 before quoting. Verify separately whether that manual edition applies to an older unit in stock or already installed.

A blank display does not identify which part needs repair

Clause 2.3.8 of the same manual describes power saving. When the AC input is lost and the battery supplies the load, the LCDs turn off. Pressing SELECT activates them for 3 seconds. The mode ends when AC input returns.

Include the circumstances in the enquiry. Was AC input present, did the rest of the system work, did the keys respond, and was the behavior continuous? This helps service staff and the supplier discuss a specific fault before selecting a board.

What to list as a separate supply item

Display and control board or assembly
Record the markings, variant, and expected contents. List the housing panel, controls, and electronic assembly separately in the agreed inventory.
Main board
State whether it will be replaced or retained. The supplier needs information about the connected equipment and confirmation that the offered revision applies.
Interconnecting ribbon cable
Agree separately on whether the cable is included in the selected assembly or ordered on its own. Provide details of the assemblies it connects and any visible markings on the cable.

If there is no service assessment yet, start by asking about repair or a complete spare unit. Attach any existing photos of markings and the service inventory. The enquiry does not require opening the charger. Internal diagnostics and work on the unit are for trained service personnel.

What stock is confirmed

The SpectraTech product listing lists the CH-105 in stock, with an indicative price from ₽185,640. This refers to the complete charger. Confirm separate availability of boards and cables for the specific variant.

Ask the supplier to state the exact part name, number and revision, condition, contents, price, and lead time. For a used assembly, agree separately on checks at handover. For a complete unit, agree on the required variant, accessories, and acceptance of the assembled charger.

Product page and manufacturer documents

Request a quotation for a Unicont CH-105 / AZU-105 or an internal assembly

All guide topics