Buy the NAB-1000: Class B AIS, transceiver and operating display
The NAB-1000 is a Class B AIS transponder for vessels that need automatic exchange of movement information in an agreed configuration. It has a separate transceiver. Plan its location and operating display as parts of one system. The SpectraTech catalogue lists the equipment as available for shipment from stock. This review explains how to order the complete station and specify its components.
Request a quote
Original NSR illustration hosted on Spectservice, with the NAB-1000 in the centre and display options on each side. It does not show a mandatory three-unit package. Confirm the selected MKD, antennas, cables and accessories in the specification.
Choose the applicable class before choosing a model
NSR lists the NAB-1000 as CSTDMA Class B equipment for non-SOLAS vessels. That identifies the equipment category and does not establish suitability for every small vessel. Specify vessel type, intended use, project requirements and required documents when requesting a quotation.
A vessel owner may first notice the price difference between the NAB-1000 and NSI-1000. A lower price does not make Class B a substitute where Class A is required. Our full NSI-1000 review covers different equipment. This review explains how to specify a Class B system when that class fits the customer’s requirements.
The NAB-1000 transmits and receives AIS messages. Specify reception and transmission of own-vessel information as part of the complete system. The display is one part of the data exchange. Confirm applicability and work scope with specialists against the agreed specification.
What CSTDMA and 2 W mean
NSR’s NAB-1000 page specifies CSTDMA, 2 W output and AIS 1/AIS 2 channels. These are model specifications. They do not establish modes from other AIS equipment, a switch to Class A or a guaranteed communications range.
Determine the required equipment type before quoting. Higher output from another model alone does not justify replacing the unit, because the class and conditions of use also change. Transceiver specifications do not describe the whole installation without its antenna, feed line, power and location.
Received information comes from messages sent by AIS participants. Manufacturer-listed compatibility with AIS-SART and AIS EPIRB concerns reception of those messages. The NAB-1000 does not take the place of a separate search-and-rescue beacon. Select those devices for their own purposes.
Transceiver and operating display
The manufacturer’s illustration shows the NAB-1000 in the centre with display options on either side. It explains the architecture and does not depict a required three-unit package. Specify one agreed display option and all parts needed to connect it.
The SpectraTech listing describes a package with a 7-inch MKD. Confirm the exact panel version when requesting a quotation. Another plotter in the illustration is not necessarily included, and an installed display requires compatibility checks before it can receive NAB-1000 data.
For a separate MKD, identify its operating position on the bridge. For an existing display, provide its model and documentation. The choice affects the parts and integration required. Agree on a single specification before ordering the display, adapters and cables.
Two antennas and serial interfaces
Our listing specifies GNSS and VHF antennas with 10 m cables each. These are separate signal paths and the antennas are not interchangeable. Confirm designations, cable lengths and accessories for the selected installation. The illustration of the transceiver does not show them.
The manufacturer specifies one RS232 and one RS422 interface, NMEA 0183 and 38,400 bit/s. Identify the interface supported by the receiving device. A similar connector or an NMEA label alone does not establish full data exchange with a particular instrument.
List the receiving devices, available links and required display. Wiring and port configuration belong in the documentation and work for the selected version. Include the expected integration result in the purchase specification.
Complete package and quotation
NSR lists IP22 for indoor equipment and IP66 for the antenna section. The antenna rating does not apply to the transponder or display. Assess installation conditions for each unit separately. The equipment being marine does not establish that the complete system can be installed outdoors.
SpectraTech lists the NAB-1000 in stock. Confirm actual availability, condition, version, contents and lead time before ordering. We quote the transceiver, agreed MKD, antennas, cables and required accessories as one package with an overall price. Confirm applicability and the documentation package for the particular order.
Installation, configuration, integration and delivery are listed separately. Provide vessel type, class requirements, chosen display or retained receiver model, installation conditions and receiving city in Russia or Kazakhstan. The resulting price applies to a defined NAB-1000 system, with any open technical issues recorded before purchase.
NAB-1000 in our catalogue
The NAB-1000 listing shows availability and shipment from stock. It describes a package with transceiver, 7-inch MKD, GNSS and VHF antennas, each with a 10 m cable. We include the bracket and accessories in one agreed specification. Confirm version, condition, actual stock, contents, overall price and applicable documents in the quotation. Work and delivery are separate. This listing does not constitute a public offer.
Request a quotePrimary source: NSR NAB-1000 AIS CLASS B — official product page and manufacturer’s illustration. Manufacturer specifications do not establish the actual package or operating conditions aboard a particular vessel.