You can order a complete Icom AT-130 tuner or discuss repairing an internal assembly. For a repair, the name AT-130 alone is insufficient. Icom Inc. documentation distinguishes the assembly designation, the component reference on the schematic and the full order number. This article explains what to include in an enquiry.
Request a quotation: Icom AT-130 and internal assembly

Two printed circuit boards in the manufacturer’s parts list
Section 5 of the AT-130/AT-130E/AT-140 service manual lists the following entries under TUNER UNIT:
- EP1 · B3678G
- Order number 0910037487, described as PCB B 3678G.
- EP4 · B3758A
- Order number 0910037981, described as PCB B 3758A. This entry is marked AT-130/E only.
These details come from a particular edition of the parts list and do not apply universally to the whole tuner family. EP1 and EP4 are reference designators, B3678G and B3758A identify printed circuit boards, and the ten-digit numbers are used to order parts from that document. Retain all three identifiers in the enquiry.
TUNER UNIT, MANUAL UNIT and populated boards
Section 8 shows the TUNER UNIT separately from the MANUAL UNIT. The latter is marked for the AT-130E only. A common family name does not establish that the AT-130, AT-130E and AT-140 contain the same assemblies.
A line described as PCB does not specify the contents of a quotation. State whether you need a bare PCB, a populated board, separate components or a refurbished tuner. Ask the supplier to confirm what the quoted price covers and what test results will accompany the item.
Why check the document revision
The later manufacturer service manual S-14014HZ-C1-q, dated January 2008, uses the names TUNER-1 UNIT and MANUAL-1 UNIT and includes the AT-141 in the family. Check the version of the assembly on offer. Do not apply a part number from an older list to a different board revision without confirming applicability.
Include photographs of the removed assembly’s markings and both sides of the board, the full tuner designation, the serial number if known and the service report. Have the servicing specialist inspect and photograph internal equipment. The enclosure photograph cannot identify the exact internal revision.
What to agree before reserving equipment
- Whether you need a complete AT-130 or a particular internal assembly.
- The board marking, reference designator in the applicable list and full order number.
- Condition, actual contents and documentation for the item on offer.
- Whether acceptance covers the board alone or operation of the tuner in the agreed configuration.
The SpectraTech stock catalogue lists the Icom AT-130 tuner. Availability of the complete tuner does not establish separate stock of the B3678G, B3758A or any other internal assembly. Confirm availability, applicability, contents, price and lead time separately.
For selecting a tuner for a radio, see the article on the AT-130 and FC-40. Initial and subsequent tuning times are a separate operating topic. This article focuses on identifying the part for a quotation.
Product listing and manufacturer documents
- Icom: Original AT-130/AT-130E/AT-140 Service Manual, sections 5 and 8, archived copy
- Icom: Service Manual S-14014HZ-C1-q, January 2008, archived manufacturer document
- Icom Inc.: Official AT-130 page